Skip to main content

How to send/receive encrypted email from Microsoft Outlook

Introduction

An external user is someone who has their email hosted outside the domain and control of the Hermes Secure Email Gateway. For example, an external user would have their email hosted with an email service like Gmail, yahoo etc. Typically, this external user has the need to send/receive encrypted email with an internal user i.e. someone who is inside the domain and consequently the control of the Hermes Secure Email Gateway.

Prerequisites and Goals

  • The external user will be using Microsoft Outlook to send/receive email

  • The external user has been issued a secure email certificate from the Hermes Secure Email Gateway

  • The external user has installed the secure email certificate into their Microsoft Outlook

  • The internal user has sent a signed email to the external user and the external user has imported the internal user's certificate from that signed email into their Outlook contact for that internal user

  • The external user has configured their Outlook to send signed/encrypted email to the internal user

If all of the above sounds complicated, don't worry. This guide will walk you through every step of the way to get everything configured correctly.

Assumptions

For the purposes of this tutorial, we will use two email accounts. First, support@deeztek.com will be the internal user account i.e. someone inside the domain and control of the Hermes Secure Email Gateway and computerservices@gmail.com will be the external user account i.e. someone outside the domain and control of the Hermes Secure Email Gateway. The reason we make this distinction is because sending secure email from internal users is automatic, however sending secure email from external users requires configuring Outlook first.

This guide also assumes you have already received an email with an attached .pfx file. A .pfx file is nothing more than a password protected certificate that you have to install into your Outlook email client. In order to install the certificate, you must have the password which should had been given to you already.

Instructions

  • Open the email with the subject Your PFX Certificate File with the attached .pfx file (Figure 1)

Figure 1

image-1620300232559.png

  • Double-click on the attached key.pfx file. If you get an opening attachment warning, click the Open button (Figure 2)

Figure 2

image-1620300314384.png

  • On the Certificate Import Wizard window, ensure Current User is selected and click the Next button (Figure 3)

Figure 3

image-1620300376871.png

  • On the File to Import window, simply click the Next button again (Figure 4)

Figure 4

image-1620300472600.png

  • On the Private key protection window, enter the certificate password you were provided in the Password field, ensure Mark this key as exportable options is  checked and click the Next button (Figure 5)

Figure 5

image-1620300584903.png

  • On the Certificate Store window ensure that Automatically select the certificate store based on the type of certificate is selected and click the Next button (Figure 6)

Figure 6

image-1620300748772.png

  • On the final Completing the Certificate Import Wizard window simply click the Finish button (Figure 7)

Figure 7

image-1620300799954.png

  • You should get a The Import was successful window. Click OK to close that window (Figure 8)

Figure 8

image-1620300839975.png

  • Next, back in your Outlook, click on File --> Options  (Figure 9)

Figure 9

image-1620300984331.png

  • In the Outlook Options window, click on the Trust Center option on the left and then click on the Trust Center Settings button (Figure 10).

Figure 10

image-1620301198279.png

  • In the Trust Center window, click on Email Security a under Encrypted email section click the Settings button (Figure 11)

Figure 11

image-1620302910234.png

  • In the Change Security Settings window, enter a friendly name of your choosing in the Security Settings Name field (Figure 12).

Figure 12

image-1620303101074.png

  • Next, click on the Choose button on the Signing Certificate section (Figure 13).

Figure 13

image-1620303241656.png

  • On the Select a Certificate window, click on More choices (Figure 14).

Figure 14

image-1620303444269.png

On the More choices list of certificates, select the certificate with your e-mail address, ensuring the Valid From field has an end date in the future and then click on the OK button (Figure 15). It's possible you have more than one certificate installed in your machine, so you must ensure you select the correct certificate. If you are unsure, ask your for help with your IT department.

Figure 15

image-1620303744752.png

  • Next, back in the Change Security Settings window, the Signing Certificate and the Encryption Certificate sections should be filled in with your e-mail address. Click the OK button (Figure 16).

Figure 16

image-1620304076999.png

Next, back in the Trust Center window, click the OK button to return back to Outlook (Figure 17).

Figure 17

image-1620304276429.png

  • Next, back in Outlook Home window, click New Email to compose a new email message. In the compose message window, click on Options and note the Encrypt and Sign buttons (Figure 18).

Figure 18

image-1620304646799.png

  • In order to send an encrypted message to someone, you must first have that person's public key.key. That's usually accomplished by having that person send you ana signed e-mail message that's signed with their public key and thenwhich you can then import that person and their public key into your Outlook contacts.

  • Once you receive thata email,signed e-mail message, double-click it andto open it. Please note that youmessage MUSTand double-clickensure a the emaildigital messagesignature sinceicon on the emailtop-right ishand encryptedcorner it will NOT preview in Outlook. Once you haveof the message open you willl notice a padlock icon and a ribbon icon to the right of the message. This means that the message has been encrypted and signed by the sender (Figure 1619).

Figure 1619

send_receive_external_users_figure16.pngimage-1620317785780.png

  • Next, right-click on the Fromname fieldof the sender on the message and on the resultant drop-down menu click on Add to Outlook Contacts (Figure 1720)

Figure 1720

send_receive_external_users_figure17.pngimage-1620318144399.png

  • Next, onin the Contact window, make any necessary changes you may want and click on the Save & CloseCertificates window button (Figure 1821)

Figure 1821

send_receive_external_users_figure18.pngimage-1620318336031.png

  • SavingEnsure that a certificate (public key) appears under the Certificates (Digital IDs) section and click the Save & Close button to save the contact in your Outlook contactsContacts also(Figure saves22).

Figure 22

image-1620318575337.png

  • Since we now have the person's public key, we can now send encrypted e-mails to them. From the Outlook Home screen, click New Email to compose a new message to that individualsperson. personalIn certificate.the OnceTo thatfield, certficateenter isthe person's e-mail address or select the previously saved incontact from your Outlook contacts, youclick willon beOptions ableand ensure Encrypt is selected and optionally the Sign button is selected (Sign is not required in order to send an encrypted emailse-mail) toand thatthen individualclick withoutthe Send button (Figure 23).

Figure 23

image-1620319133264.png

  • If you did not get an error from Outlook complaining.

    about sending an encrypted e-mail, then you configuration has worked.