Relay Domains

In order for Hermes SEG to deliver email, you must first set the domain(s) that Hermes SEG will process email for along with their corresponding email server(s). You can add as many domains and email servers as required. An email server can be configured as an IP address or a Host Name as long as the Hermes SEG can reach it over Port TCP/25. Multiple domains can be pointed to the same email server if necessary.

Add Relay Domain with IP Address Destination

  1. Under the Relay Domain Destination Type, select the IP Address Destination option.
  2. In the Relay Domain field enter the domain name and in the Dest IP fields, enter the email server's IP address and click the Add button (Figure 1).

Figure 1

image-1606159087277.png

  1. After adding a Relay Domain and IP Address Destination, the entry will show up below the Edit/Delete domains & Destinations section (Figure 2).

Figure 2

image-1606159096831.png

Add Relay Domain with Host Name Destination

  1. Under the Relay Domain Destination Type, select the Host Name Destination option.
  2. In the Relay Domain field enter the domain name, in the Dest Host Name field, enter the email server's Host Name part of the FQDN address (without the domain part), in the Dest Host Domain field, enter the email server's domain part of the FQDN address and then click the Add button (Figure 3).

Figure 3

image-1606159106034.png

  1. After adding a Relay Domain and Host Name Destination, the entry will show up below the Edit/Delete domains & Destinations section (Figure 4).

Figure 4