Network Settings In this section you can setup the Hermes SEG network settings such as Hostname, IP address, Subnet, DNS and gateway. It's highly recommended that the Network Mode be set to Static. The The Host Name and Primary Domain Name you set in this section is used for SMTP transactions such as SMTP TLS as well as system functions such as OS hostname. Set the  Network Mode  drop-down to  Static . Fill in the  Host Name  field. Ensure you enter only the name without the domain part. For example, if the FQDN of your Hermes SEG appliance is going to be  smtp.domain.tld , then in the  Host Name  field you will simply enter  smtp  without the domain part. Fill in the  Primary Domain Name  field. For example, if the FQDN of your Hermes SEG appliance is going to be  smtp.domain.tld , then in the  Primary Domain Name  field you will simply enter  domain.tld . Fill in the Hermes SEG appliance  IP Address , select the appropriate  Subnet Mask  for your network, fill in the  Gateway  and  DNS1 . If applicable, fill in  DNS2  and  DNS3  fields. Click on the  Submit  button. Once the settings are saved, they will not take effect until you click on the  Apply Settings  button. Click on the  Apply Settings  button ( Figure 1 ). Figure 1 If you changed Hermes SEG IP Address, your browser will most likely time out. Remember, to access the Hermes SEG Administrator Console Web GUI at  https://  is the IP you set above.